LogoXtenda-Leg__LDA-150.jpg
LADDER ACCESSORIES & PAINTER TOOLS


   
7 26097 00600 7 600 Xtenda-Leg Rubber Feet -T.png Xtenda-Leg® Ladder Leveler RUBBER FEET style
$94.50
Intended for use on firm surfaces Not intended for use on slippery surfaces Pair=2pcs

Quantity

   
7 26097 00700 4 #700 Xtenda-Leg Cleated Feet -b1-T.png Xtenda-Leg® Ladder Leveler with CLEATED FEET
$103.80
Intended for use only on penetrable surface, where the 600 rubber foot would not be sufficient. PAIR = 2pc

Quantity

   
604RubberFeet.png Xtenda-Leg® REPLACEMENT RUBBER FEET
$29.00
Includes: 2-Kyron Rubber Feet, 6-screws

Quantity

   
804 Feet Hardware  Kit.png Xtenda-Leg® Replacement Hardware Kit: Half & Slotted Caps
$18.50
Replace lost caps. Corrects poor design from 2006-2008 of foot popping off Swivel Ball. 2pc Half Cap, 2pc C-cap, 6 screws

Quantity

   
704CleatedFeet.png Xtenda-Leg® REPLACEMENT CLEATED FEET
$37.50
Includes: 2-Cleated Feet,6 Screws

Quantity

   
806-Bracket_STANDOFF_BLOCKS_-Kit_-a_-T.png Xtenda-Leg® BRACKET STANDOFF BLOCKS
$20.00
Allows Feet to extend up past original feet of Ladder. Ideal for Cleated Feet version of Xtenda-Leg. Allows you to use original ladder feet when on hard surfaces and lower Cleated Feet when on penetrable surfaces. Includes 4 BLOCKS, 4 EXTRA LONG BOLTS

Quantity

   
500-CAPS.JPG LADDER RAIL CAPS
$10.45
Helps stabilize your ladder while protecting support surfaces from being scratched or marred. Made of a pliable rubber that expands to fit most extension ladder rails up to 3-3/16 x 1-3/16”

Quantity

   
7 26096 00750 0  #750 KraftShieldHolder Quick-Angle Adj-Handle -T.png LDA Kraft-disposable cardboard PAINT SHIELD HOLDER
$14.33
Kraft-disposable cardboard PAINT SHIELD HOLDER Insert cardboard for use as disposable shields. Save time as you eliminate the need for taping areas you don’t want to paint and little clean up as you toss cardboard when job is done. Shield not in a comfortable position, change shield angle with just a push or pull of shield through LDA exclusive ratchet angle adjustment. Tool accepts pole for extended reach.

Quantity

   
Paint Shield 4 -T.png 24" Scrapper-Mud Knockdown Tool
$13.91
Paint Tool: 24" LDA Scrapper-Mud Knockdown 18"handle A versatile shield, both rigid and compact. Rigidity comes from the one-piece construction and special forming of the paint guard. This shield makes an excellent wipe-down knife and its compact size makes working in confined areas a breeze.

Quantity

   
7 26096 51071 0 510-710 Plastic Flex-T.png 24" LDA Paint Shield_Plastic-Styrene
$14.47
"24"" LDAStraight Plastic-STYRENE 18""wide handle Easy to clean shield is made from high impact styrene. A drip guard with front & back run-off lips direct paint away from handle and control sagging while still allowing flexibility. Plastic shields are less likely to leave marks on surfaces like aluminum siding and white or pastel colors sometimes evident with aluminum shields. "

Quantity

   
726096610717 610-740 Angled Flex -T.png 24" LDA Paint Shield Plastic-Styrene
$17.75
24" LDA Straight Plastic-STYRENE Pole handle A versatile shield, both rigid and compact. Rigidity comes from the one-piece construction and special forming of the paint guard. This shield makes an excellent wipe-down knife and its compact size makes working in confined areas a breeze.

Quantity

   
726096410713  #410-710 Alum Angled Stiff-T.png 36" LDA Paint Shield Aluminum Angled Wide Grip Handle
$15.53
36" LDA Angled Aluminum 18""wide handle A 30º angle on this Paint Spray Shield, it provides a flat area to rest the weight of the shield against. Less fatiguing and more comfortable when reaching above to a ceiling or below to a foundation. Special bends create a highly functional drip guard.

Quantity

   
7 26096 22074 0 220-740 Alum Straight -T.png 36" LDA Paint Shield_Aluminum Pole Handle
$21.00
36" LDA Straight Aluminum Pole handle with fast ratchet angle adjustment. This Straight Aluminum Paint Spray Shield is the perfect choice when the job calls for rigid control and clean lines. Special bends create a highly functional drip guard.

Quantity

   
726096410713  #410-710 Alum Angled Stiff-T.png 48" LDA Angled Aluminum 18" wide grip handle
$21.22
36" LDA Leading Edge Aluminum, 18" wide handle, a 30º bend 5/8” off leading edge lets shield form easily to shallow widths such as window frames. Allows user to shield areas while moving the body of shield away from the work area. This bend close to the edge adds further stiffness preferred by some. "

Quantity

   
726097008087.JPG Xtenda-Leg® RENEW KIT
$52.50
Replaces all parts of LOCKING MECHANISM. Brings Function & Safety as New. 6 Lock Plates, 2 Springs, 2 Shafts with Swivel Balls, roll pins.

Quantity

 
LADDER ACCESSORIES & PAINTER TOOLS